Philips Speaker SPA2300 User Manual

SPA2300_QSG_Single_EN.qxd 06-12-2005 13:19 Pagina 1

EN Multimedia Speaker System

SPA2300

Connect

AUDIO INPUT

AUDIO

OUTPUT

Welcome

Quick start guide

VOLUME

Need help?

Helpline

1. Connect the right satellite to the AUDIO OUTPUT/R port of the subwoofer.

2. Connect the left satellite to the AUDIO OUTPUT/L port of the subwoofer.

3. Connect the black plug of the wired remote control to the AUDIO INPUT

port of the subwoofer.

United Kingdom

0906 1010 016 (£ 0.15)

Connect

4. Connect the green plug of the wired remote control to the corresponding port of your

audio source (for example, your computer).

5. Connect the power cable from the AC IN socket of the subwoofer to a power supply.

Enjoy

Specifications are subject to change without notice.

Trademarks are property of Koninklijke Philips Electronics N.V. or their respective owners.

1. Set the ON/OFF switch on the rear of the subwoofer to the I position.

>The blue light on the front of the subwoofer comes on.

2. Adjust the bass level with the BASS control on the right side of the subwoofer.

3. Adjust the volume level with the VOLUME control on the wired remote control.

>You can now enjoy the sound of your multimedia speaker system.

312 247 501 031