Install instructions for CI round flush mount models:
CI-6.0 IX QM
T
E
C
H
N
O
L
O
G
Y
Thank you for purchasing Phase Technology Custom Installation
speakers. Before installing, please read through this installation
manual thoroughly.
Universal flange & grille
assembly (CI-FGR QM)
(purchase separately)
Speaker/baffle
assembly
Flange clamp
screw (4x)
Grille
Flange clamp (4x)
The CI-FGR QM will clamp
material up to 11/2” thick.
Speaker
installation tool
Baffle clamp screw (4x)
Choose the appropriate mounting location for each speaker.
When deciding upon a location, consider the following:
• Make certain your speaker wires can be run to or are accessible from these
locations.
• Make certain the wall or ceiling material is sturdy enough to support the
weight and vibration of the speakers.
• It is recommended that our pre-construction rough-in brackets (part number
RB-17*) be used whenever possible in new construction. A back box (part
number BB-12) is also available.
• Make certain the area behind the speaker is free of obstacles such as wall
studs, electrical wiring, pipes, etc.
• Each speaker should be positioned properly, relative to the listening area
for good coverage.
• Audio performance and room-to-room isolation will be improved if there is
some fiberglass insulation placed loosely behind the speaker.
*The RB-17 rough-in bracket is available for installations in new construction.
218-1240
8650 College Boulevard
|
Overland Park, KS 66210
|
(888)phase tk
|
|
|
Philips Bottle Warmer SBCSC250 User Manual
Philips Car Speaker HTD3510 User Manual
Philips Microcassette Recorder LFH0655 User Manual
Philips Stereo System SWA2112W User Manual
Philips Universal Remote SBC RU610 User Manual
Pioneer DJ Equipment Serato DJ Edition User Manual
Pioneer Home Theater System VSA AX10i S User Manual
Polar Watch RS 800 SD User Manual
Porter Cable Saw 36 225 User Manual
Profile Oven JTP18BABB User Manual