PYLE Audio Heart Rate Monitor PHRM32 User Manual

Heart Rate Monitor Watch

MODE

PHRM32

monitor

SET/SAVE/EL

START/LAP

STOP/NEXT

D. DAILY ALARM MODE

1. The battery compartments located at the back of the watch.

2. To install/replace the battery, unscrew the battery compartment with the screw driver

and simply slide out afterwards.

3. Take out the old battery and dispose of properly.

4. Gently place a new battery into the battery slot of the battery compartment, making

sure that the poles are correctly placed.

5. Screw back the battery compartment, when finished as in the diagram below

SCREW

BACK COVER

O Ring

CR2032

BATTERY

Heart Rate Belt

1.Hold the Heart Rate Belt firmly.Insert a coin into the slit of the compartment lid and

turn it clockwise .The lid should come off easily.

(Remove used battery CR2032)(Diagram 2)

2.Gently place the battery into the battery slot of the battery compartment.(Diagram 3)

3.Put the compartment lid back into place and tighten it firmly by turning it

anti-clockwise with the help of coin.